Πριν λίγο δημοσιεύτηκε το αναμενόμενο Bae 146 της JustFlight για το MSFS. Ένα σκάφος που υπήρχε και στον στόλο της τότε Astra Airlines.
To ΒAe της JustFlight είναι ένα από τα πρώτα «high fidelity» airliner για το MSFS. Στην σελίδα τους, όπου είναι διαθέσιμο στη τιμή των ~59€, το αποκαλούν ακόμα και «study level». Όποιοι έχουν αγορασμένο το ίδιο addon σε άλλη πλατφόρμα (X-Plane πχ) δικαιούνται 10% έκπτωση. Εδώ να σημειωθεί ότι η έκδοση για MSFS είναι αρκετά ανανεωμένη και περιέχει πολλά περισσότερα features.
Το πακέτο περιέχει 8 διαφορετικές εκδόσεις του σκάφους και μεγάλη γκάμα από liveries. Είναι βασικά το -100 / -200 και -300 όπως και τα ανάλογα configs για Passenger, Cargo η Military.
Όπως θα δείτε και πιο κάτω στην αναλυτική λίστα των features, έχει ένα σωρό custom systems και configs. Τα FMS που βασίζονται στο ProLine των WorkingTitle είναι ολοκληρωμένα και μπορείτε να τα δουλεύετε άνετα για κάθε διαδικασία SID, STAR, HOLD’s κτλ. Αν θέλετε όμως, παρακάμπτετε τα FMS και κάνετε κλασικό VOR-VOR. Το σκάφος επίσης είναι πιστοποιημένο και για CAT 2 approaches. ‘Όπως θα διαβάσετε κάτω σε μια από της ανακοινώσεις τους στο FB, θα συνεχιστεί το development κ θα προστεθούν και άλλες επιλογές FMS/GPS όπως το UNS-1, GTN750 κτλ.
„As the 146 was originally launched with only the means for conventional (VOR/NDB) navigation, and later retrofitted with a variety of GPS/FMS units for greater flexibility. Our 146 will release with an FMS that is based on the popular WT unit, modified for suitability with the 146 avionics and autopilot, providing full LNAV functionality, SID/STARs, MSFS and SimBrief flight plan support etc. As with all our MSFS aircraft, we will continue to introduce new features over time, including different FMS/GPS units such as the commonly fitted UNS-1 and even the GTN 750 (as fitted to some current firefighting 146 aircraft), providing you with even greater customisability of your aircraft.”
Υπάρχει ένα manual στα αγγλικά με περίπου 250 σελίδες όπου εξηγούνται όλα στην εντέλεια. Πριν κάνετε κάποια αγορά, μπορείτε να κατεβάσετε το manual και ελεύθερα από σύνδεσμο στο κάτω μέρος της σελίδας του product page
- Automatic and manual pressurisation modes with control of outflow valves, barometric and cabin rate settings, indications and cabin altitude warnings
- Cabin altitude and differential values based on real-world data
- Automatic and manual flight deck and cabin temperature control – takes account of ambient temperature, air supply from the engines and/or APU, fresh or recirculated air and even whether the doors are open!
- Autopilot and flight director system with multiple modes:
– Pitch – altitude arm and hold, vertical speed, IAS, Mach, glideslope and go-around
– Roll – VLOC, BLOC, LNAV (FMC) and HDG
– Turbulence mode
– Pitch and bank selection and hold
– Sync mode for quick changes to aircraft attitude - Fully-functional mode annunciations, engagement and disengagement criteria (including roll and pitch rate cut-out and stall cut-out) and integration with ADI and HSI
- Simulated CAT 2 approach monitoring system
- Set fuel quantity in individual tanks (including total fuel weight, automatically split between tanks)
- Set payloads in passenger cabin and cargo holds (including Zero Fuel Weight)
- Control the pilot and cabin announcements
- Quickly select aircraft states (Ready for Take-off, Turnaround and Cold-and-Dark)
- Toggle ground power unit (GPU) and chocks
- Monitor CG position and automatically set take-off trim based on CG
- Aircraft configuration menu with many options, including altimeter sync, traditional/TCAS VSI, state saving, cabin lighting, model options and much more
The EFB can also be used for flight planning and monitoring:
- Import your SimBrief flight and view a summary or scrollable full OFP
- Monitor your position in real time using a map view with tracking, zoom and pan options
- Explore and view your Navigraph charts
- Use a notepad for making notes during the flight, particularly useful for noting down clearances and taxi instructions
- Fully functional FMS for lateral navigation (LNAV), based on the popular Working Title FMS, allowing for realistic modern-day flight planning and operations
- Up-to-date AIRAC cycles (via the Navigraph MSFS database)
- Lateral navigation integration with LNAV autopilot mode and HSI
- Ability to create full flight plans or import the default MSFS flight plan
- SimBrief import function
- SID and STAR support
- Holding pattern support
- Dual VHF COMM, NAV and ADF radios, with 8.33kHz spacing support
- Cockpit voice recorder test and indication systems
- Functioning audio selector and PA chime
- Independent engine, APU and external power (AC and DC) sources
- Generator and TRU loading, and automatic load switching
- Standby generator and inverter power sources for non-normal procedures
- Independent AC channels, including normal, essential and emergency busbars, and bus-ties facilities
- Engine, APU and fuselage fire detection and warning systems
- Engine fire extinguishing system
- Fully simulated test functionality
- Servo-tab simulation – the position of elevator and aileron surfaces is dependent on servo-tab control inputs and airflow over the surface
- Iconic tail-mounted airbrakes, roll and lift spoilers with independent hydraulic sources, realistic deployment times and custom AC and PTU pump sounds
- Flight control disconnect and yoke control lock functionality
- Accurately simulated flap system with hydraulic and electrical power sources, baulk override, fault testing and iconic howl when deployed in the air
- Stall identification and warning systems, including stick shaker and pusher, and inhibit mode
- Simulated configuration warning system
- Flap Trim Compensation (FTC) system on the 146-300
- Realistic fuel load and burn based on real-world data
- Simulated electrical normal and hydraulic standby fuel pumps, centre and wing tanks with feed tanks for each engine, and LP and HP fuel cocks
- Fully functional centre-to-wing fuel transfer, cross-feed and common-feed valves
- Auxiliary fuel tanks fitted (can be toggled via the EFB) to provide additional range – great for bizjet operations
- Independent yellow and green hydraulic systems with realistic pressure, quantity and supply to other systems
- Simulated AC- and DC-driven back-up pumps and power transfer unit (PTU)
- Functional standby generator for supplying AC and DC electrical power in non-normal situations
- Ice detection and accumulation simulation, anti-icing and de-icing functionality for exterior surfaces, warning systems for in-flight monitoring
- Simulation of separate inner and outer wing anti-icing, and windscreen overheating
- A vast array of annunciators, including accurately simulated Master Warning System (MWS) with amber and red cautions, audible warnings and ground testing for all systems
- Flight Data Entry Panel (FDEP) for entering flight details (date, flight leg and number)
- Normal and emergency gear extension, including gear down-lock override
- Gear configuration indication and warning systems
- Simulated brake accumulators supplied via the hydraulic power sources (yellow or green), anti-skid and brake temperature indicator with cooling down periods that are affected by ambient temperature, brake usage and brake fans
- Captain and First Officer tillers for realistic nose-wheel steering
- Transponder with TCAS (integrated with VSI TCAS display) and flight ID input functionality
- Dual RMI/DBI and HSI navigation instruments, fed by two NAV and ADF radios, including DME hold function
- Instrument source selector for NAV 1, NAV 2 or dual navigation via the ADI, HSI and auto-flight system
- Choice of traditional or TCAS VSI
- Fully functioning test modes on navigation instruments (e.g. HSI, radio altimeter and ADI)
- Custom-coded GPWS with modes 1-6, steep approach mode, flap warning override and test functionality
Flight crew and passenger oxygen systems with valve and mask deployment controls
Realistic bleed air demand from engines and APU, and pneumatic supply to air-conditioning and ice protection systems
- Realistic APU start and shutdown procedures, and bleed air and electrical power supply
- RPM, TGT and fuel burn values based on real-world data
- Animations panel for controlling passenger and service doors, lower cargo doors and fuselage cargo door
- Deployable airstairs, powered by the Yellow hydraulic system
- N1, N2, TGT, oil pressures and temperatures will all differ subtly between engines
- Accurately simulated Thrust Modulation System (TMS) with take-off (full or flexible), maximum continuous thrust, TGT and descent modes. Takes account of engine bleed air requirements, e.g. for air conditioning and ice protection systems.
- Realistic engine start procedures with external, APU or cross-start sources
- Simulation of ground and flight idle baulks
- Take-off and landing speed card which automatically displays reference speeds depending on current aircraft weight, and settable airspeed indicator and engine instrument bugs
- Independent lighting controls for Captain and First Officer
- Dimmable integral lighting for each panel
- Dimmable dynamic flood and storm lighting for a highly immersive and customisable night environment (more than 10 individual light sources, including entry, lap, sill and flight kit)
- Freely moveable lap and sill lighting
- Accurately simulated exterior lighting, including wing, logo and runway exit lights, and taxi/landing and navigation lights with different intensities
- MSFS-native (Wwise) sound package taking full advantage of the new MSFS capabilities
- Studio quality Lycoming ALF-502 engine noise recorded from RAF C.Mk3 ZE708
- Over 450 flight deck sound effects recorded from RAF CC.Mk2 ZE701
- Detailed equipment audio such as the APU, brake fans, electrical circuits, hydraulic equipment and many more
- Distinctive flap retraction/extension airflow ‘howling’ sound
- Detailed physics-based effects on engine and wind noise
- Accurately positioned 3D sound sources (best enjoyed in VR!)
- Custom crash and scraping effects
- Realistic and accurate performance in the air and on the ground, using unique flight models for all variants based on real-world performance and handling data, and input from real-world 146 pilots
- Custom effects for enhanced immersion, including engine, GPU and APU exhaust haze
- Complete exterior lights package as seen on the real 146, including landing, wing, runway, logo and taxi lights that illuminate objects and the ground, for ease of operation during the hours of darkness
- 258-page PDF manual with flight tutorial, systems guide, procedures, limitations and handling notes
- Multiple interior and exterior camera presets, including wing views
- PSD paint kit (1.4GB) available included so you can create your own paint schemes
- Full support for MSFS checklists (manual and Automatic/Co-pilot modes)
- Support for numerous control assignments for compatibility with controllers and hardware
- Microsoft Flight Simulator (i.e. the 2020 Standard, Deluxe or Premium Deluxe edition of Flight Simulator)
- Processor: Intel i5-4460 / AMD Ryzen 3 1200 (Intel i5-8400 / AMD Ryzen 5 1500X recommended)
- RAM: 8GB (16GB recommended)
- Graphics card: nVidia GTX 770 / AMD Radeon RX 570 (nVidia GTX 970 / AMD Radeon RX 590 recommended)
- Operating System: Windows 10 / 11
- Peripherals: Joystick or compatible game controller (e.g. Xbox One Controller for Windows)
- 1GB hard drive space
